Grandstream HT502 Preferred Set Up

Preferred Set Up

Using this set up will ensure proper communication between the phone adapter and our network.

On the back of your Internet Modem will be an ethernet port.
Connect an ethernet cable from this port and connect it to the WAN port on the back of your Grandstream HT-502 phone adapter.

Once you have connected your Internet Modem to your Grandstream HT-502 phone adapter you can re-connect power to your Internet Modem

On the back of your phone adapter is a port labeled LAN
From the LAN port we need to connect an ethernet cable to your Router

Connect a telephone cord from your phone directly to Phone 1 on your Grandstream HT-502 phone adapter

You can now connect power to your Grandstream HT-502 phone adapter.

After your Grandstream HT-502 phone adapter has powered up you can re-connect power to your router.

At this point the lights on top of the phone adapter should be :

Power Solid Green
WAN Solid Green / Solid Amber (its ok if it blinks)
LAN Solid Green / Solid Amber (its ok if it blinks)
Phone 1 Off / Solid Green or Amber / Blinking Green or Amber
Phone 2 Off / Solid Green or Amber / Blinking Green or Amber

At this point you should be able to pick up the phone connected to Phone 1 and start placing calls.

No comments:

Post a Comment

NOTE:: sent to the “shit list” bullshit spam messages with links. DO NOT WASTE YOUR TIME !!!!